File list
From High Salvington Mill Trust
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | User | Description | Versions |
---|---|---|---|---|---|---|
09:09, 13 April 2021 | Exterior Mill Stone Against Tree.jpg (file) | 1.93 MB | WikiSysop | Mill stone leaning against fir tree near gate. This is the one dug up from a patio in Cleveland Road (?), just off Mill Lane. Photograph by Jeff Best, 21st May 2020. | 1 | |
09:27, 13 April 2021 | Exterior Mill Stone Near West Hedge.jpg (file) | 142 KB | WikiSysop | Used mill stone which spent many years by the west hedge. Photograph by Jeff Best on 30th July 2009. | 1 | |
19:48, 18 April 2021 | Feeding the Timber for Cutting 20110408.jpg (file) | 858 KB | WikiSysop | Cutting the timber. Photograph by Jeff Best on 8th April 2011. | 1 | |
00:11, 30 April 2021 | Flat plate aerofoil.png (file) | 44 KB | WikiSysop | Steve Temple Storm Report - Flat plate aerofoil | 1 | |
00:12, 30 April 2021 | Forces on Shutters.png (file) | 114 KB | WikiSysop | Steve Temple Storm Report - Forces on Shutters | 1 | |
16:23, 19 April 2021 | Frank Gregory Model Windmills 1.jpg (file) | 1.23 MB | WikiSysop | Frank Gregory model windmills - part of the collection on a revocable loan from his daughter. | 1 | |
16:34, 19 April 2021 | Frank Gregory Model Windmills 2.jpg (file) | 1.85 MB | WikiSysop | Frank Gregory's daughter loaned his windmill models to HSMT on a revocable loan. | 1 | |
19:09, 15 October 2023 | Furrows.gif (file) | 2 KB | Jeffrey.Best | Scissors cutting action of a pair of millstones as seen from the end view of two furrows. Source: The Art of the Millstones, How They Work by Theodore R. Hazen at https://www.angelfire.com/journal/millrestoration/millstones.html. | 1 | |
12:14, 16 April 2021 | Gatehouse Before Conversion to Archive.jpg (file) | 825 KB | WikiSysop | Gatehouse Before Conversion to Archive. Photograph by Jeff Best | 1 | |
17:07, 25 April 2021 | Gatehouse Front 2021.jpg (file) | 1.2 MB | WikiSysop | Front of gatehouse. Photograph by Jeff Best on 25th April 2021. | 1 | |
17:05, 3 May 2021 | GlyndWindpumpWithStocks.jpg (file) | 1.13 MB | Jeffrey.Best | Glynde Windpump with stocks before sail boards installed. Photograph by Jeff Best on 30th March 2008. | 1 | |
20:31, 21 April 2021 | Glynd Wind Pump Information Board.jpg (file) | 948 KB | WikiSysop | Glynde Wind Pump information board. Photograph by Jeff Best. | 1 | |
14:10, 28 March 2021 | GlyndeWindPumpAssemblage.jpg (file) | 1.14 MB | WikiSysop | 1 | ||
21:41, 27 March 2021 | GlyndeWindPump 20090801.jpg (file) | 1.17 MB | WikiSysop | 1 | ||
19:57, 30 April 2021 | GlyndeWindpump001 Crop.jpg (file) | 1.94 MB | Jeffrey.Best | Glynde Windpump #1 | 1 | |
20:07, 30 April 2021 | GlyndeWindpump003 Crop.jpg (file) | 1.86 MB | Jeffrey.Best | Glynde Windpump #03 crop. | 1 | |
20:12, 30 April 2021 | GlyndeWindpump004 Crop.jpg (file) | 589 KB | Jeffrey.Best | Glynde Windpump 04 crop. | 1 | |
19:54, 30 April 2021 | Glyndewp001.jpg (file) | Error creating thumbnail: File with dimensions greater than 25 MP |
1.73 MB | Jeffrey.Best | Glynde Windpump #1 | 1 |
10:19, 30 April 2021 | GoogleEarth3dImpington.jpg (file) | 1.06 MB | WikiSysop | Steve Temple Wind Report - Google Earth 3D of Impington showing building heights | 1 | |
16:04, 25 April 2021 | Governor Bracket with Flint Pebble Bearing.jpg (file) | 1.6 MB | WikiSysop | Governor bracket displayed on stone floor with flint pebble bearing. Photograph by Jeff Best on 25 April 2021. | 1 | |
16:22, 25 April 2021 | Grain chute angle adjustor.jpg (file) | 642 KB | WikiSysop | Grain chute tilt angle adjuster on Spout Floor. Photograph by Jeff Best on 25th April 2021. | 1 | |
21:28, 27 March 2021 | Granary 20090730.jpg (file) | 1.1 MB | WikiSysop | 1 | ||
14:42, 1 June 2022 | Gruber-ChestertonTowerMill.png (file) | 410 KB | Jeffrey.Best | Chesterton Tower Mill model from the John Gruber model windmill collection. Photograph supplied to HSMT. | 1 | |
18:37, 31 May 2022 | Gruber-Heckington-MotorAssembly.jpg (file) | 1.84 MB | Jeffrey.Best | Heckington Mill model, made by John Gruber, showing inside of cap with motor assembly held in place by retaining plate and the removable shaft. The sails assembly has already been removed. Photograph by Jeff Best. | 1 | |
18:28, 31 May 2022 | Gruber-WestBlatchington-MotorAssembly.jpg (file) | 1.64 MB | Jeffrey.Best | West Blatchington windmill model, made by John Gruber, showing motor, switch and battery holder assembly with lid removed from model. Photograph by Jeff Best. | 1 | |
16:41, 1 June 2022 | Gruber-West Blatchington Mill Model.jpg (file) | 44 KB | Jeffrey.Best | John Gruber's West Blatchington Smock Mill model. Photo supplied to HSMT. | 1 | |
15:18, 1 June 2022 | Gruber Chesterton Cap Exterior.jpg (file) | 665 KB | Jeffrey.Best | Exterior of the cap, showing the pennant switch, from the John Gruber Chesterton Tower Mill model. Photograph by Jeff Best. | 1 | |
15:17, 1 June 2022 | Gruber Chesterton Cap Interior.jpg (file) | 615 KB | Jeffrey.Best | Interior of the cap from the John Gruber Chesterton Tower Mill model. Photograph by Jeff Best. | 1 | |
15:10, 1 June 2022 | Gruber Chesterton Tower.jpg (file) | 838 KB | Jeffrey.Best | John Gruber Chesterton Tower Mill model showing the tower with cap removed. Photograph by Jeff Best. | 1 | |
16:22, 3 June 2022 | Gruber Clayton Jill Mill Model.jpg (file) | 72 KB | Jeffrey.Best | John Gruber's Clayton (Jill) Post Mill model. Photograph supplied by Martin Tillman. | 1 | |
16:29, 17 May 2022 | Gruber Nutley Post Mill Model.jpg (file) | 535 KB | WikiSysop | John Gruber's Nutley Post Mill model. | 1 | |
10:23, 3 June 2022 | Gruber Typical Spanish Thatched Mill Model.jpg (file) | 89 KB | Jeffrey.Best | Photograph of John Gruber's typical Spanish thatched mill, supplied by John Tillman. | 1 | |
08:25, 3 June 2022 | Gruber West Chiltington Smock Mill Model.jpg (file) | 81 KB | Jeffrey.Best | Supplied image of John Gruber's West Chiltington Smock Mill model. | 1 | |
17:02, 17 May 2022 | Heckington Mill Model.jpg (file) | 550 KB | WikiSysop | The John Gruber Heckington Power Mill Model. | 1 | |
17:00, 17 May 2022 | Heckington Model Cap Assembly 2.jpg (file) | 1.43 MB | WikiSysop | The cap assembly of the Heckington Windmill model built by John Gruber. | 1 | |
17:05, 17 May 2022 | Heckington Model Cap Assembly Retaining Plate.jpg (file) | 1.16 MB | WikiSysop | The cap assembly of the John Gruber Heckington Mill Model, showing the retaining plate. | 1 | |
17:17, 17 May 2022 | Heckington Model Cap Assembly Showing Switch In Off Position.jpg (file) | 1.1 MB | WikiSysop | Heckington Mill Model cap assembly showing the switch in the off position. | 1 | |
20:54, 20 June 2021 | Heightsafeleaflet.pdf (file) | 317 KB | WikiSysop | Height Safe Leaflet | 1 | |
17:00, 12 May 2023 | IMG-20230208-WA0000.jpg (file) | 273 KB | WikiSysop | 1 | ||
17:02, 12 May 2023 | IMG-20230208-WA0002.jpg (file) | 264 KB | WikiSysop | 1 | ||
17:04, 12 May 2023 | IMG-20230208-WA0003.jpg (file) | 290 KB | WikiSysop | 1 | ||
17:04, 12 May 2023 | IMG-20230208-WA0004.jpg (file) | 375 KB | WikiSysop | 1 | ||
17:07, 12 May 2023 | IMG-20230208-WA0005.jpg (file) | 256 KB | WikiSysop | 1 | ||
17:08, 12 May 2023 | IMG-20230208-WA0007.jpg (file) | 202 KB | WikiSysop | 1 | ||
17:08, 12 May 2023 | IMG-20230208-WA0008.jpg (file) | 333 KB | WikiSysop | 1 | ||
17:09, 12 May 2023 | IMG-20230208-WA0009.jpg (file) | 303 KB | WikiSysop | 1 | ||
17:10, 12 May 2023 | IMG-20230208-WA0010.jpg (file) | 364 KB | WikiSysop | 1 | ||
17:10, 12 May 2023 | IMG-20230208-WA0011.jpg (file) | 317 KB | WikiSysop | 1 | ||
17:11, 12 May 2023 | IMG-20230208-WA0012.jpg (file) | 405 KB | WikiSysop | 1 | ||
17:11, 12 May 2023 | IMG-20230208-WA0013.jpg (file) | 312 KB | WikiSysop | 1 |